21 Years Focused on 

Level Measurement in Extreme Process Conditions

+86 28 8701 3699

sales@vacorda.com

HOME> NEWS

NEWS
Contact us

E-mail: sales@vacorda.com

Tel:+86 28 8701 3699

Mobile:+86 134 5853 3736

Address: Guanghua Rd, Qingyang Dist, Chengdu, Sichuan Province, China

Introduction of 3 Flow Indicators of Metal Tube Rotameter

Author:vacorda    Source:vacorda.com    Date: 2016-08-18 15:18:16

Metal pipe flowmeter consists of measuring pipe, float, indicator and process connection components with the characteristics of small size, wide measuring range, easy installation. In the industry area, it is widely used to measure flow of gas, liquid, and steam, especially suitable for mediums with low current velocity and low flow rate.

 

VACORDA provide M1, M2, M3 three kinds of indicator for customer choice. M1 is mechanical indicator for local display; M2 is remote type smart indicator and can used for Exia II CT5Ga application. M3 is multi-function smart indicator and used for Exd II BT6Gb application.

 

1. M1 mechanical indicator

 

M1 is square shell structure and use float in the pipe to let needles moving by magnetic steel moving, thus we can read the flow rate from division circle. So its characteristic is simple structure, none revise, reliable and no need power supply. Two kinds of mark for customer choice

 

2. M2 Smart indicator


(1) M2 is square shell structure, Exia II CT5Ga design and KVD type magnetic transmitter inside. This type is mechanical needle displaying Instantaneous flow, 5 digit LCD displaying Instantaneous flow, 8 digit LCD display total flow, while output 4~20mA signal, upper limit and lower limit warning signal.

 

(2) Warning Type

upper limit and lower limit warning of M2 utilizes open-collector output mode, max current is 100mA 30DC, and internal resistance 100Ω. The alarm parameters can set flexibly and reliable through panel key. The M2 has  power-fail protection function, logic function, which can set upper limit and lower limit warning and connect with PLC by electric relay or safety barrier.

 

(3) Pulse Output Type

M2 can be pulse output with min space 50ms and every pulse stand for one unit Instantaneous flow. While it is zero warning set, this warning output function convert to be pulse output, thus customer can only choose on between warning output and pulse output. M2 indicator has more function of multi-parameter setting, figures back-up, and power-fail protection. In addition, if it is not two-line power supply, there is LCD backlight for choice.

 

(4) Battery Type

M2 indicator can be battery for power supply, no signal and warning output. The battery is high power lithium battery with 3.6V, 7.5AH and can last at least 3 years. There is electricity capacity display in LCD right side, which can mention customer to change battery in time.


Battery is high work efficiency at temperature -10℃~+45℃ and too high or too low temperature will affect its lifetime. So we suggest that customers don't use it under blazing sun, raining and no-wind place.

 

3. M3 Smart indicator


M3 is multi-function smart indicator, which involves the function of M1 and M2 and has needle display system. It has Exia II CT5Ga and Exd II BT6Gb function to replace M1 and M2.


M3 can be battery for power supply, no signal and warning output. The battery is high power lithium battery with 3.6V, 7.5AH and can last at least 3 years. There is electricity capacity display in LCD right side, which can mention customer to change battery in time.


Guanghua Rd, Qingyang Dist, Chengdu, Sichuan Province, China