Level and Flow Measurement

+86 28 8701 3699


HOME> News

Contact us

E-mail: sales@vacorda.com

Factory:    0813-2629091



ChengDu:  028-87362258


After-saler: 0813-3212061

Address: Guanghua Rd, Qingyang Dist, Chengdu, Sichuan Province, China

How to correctly install the wiring about magnetic Level gauge?

Author:vacorda    Source:vacorda.com    Date: 2018-03-19 15:04:34

The UHC type magnetic flap liquid level gauge is made up of measuring body, dual-colored display cylinder, ruler, top & low flange, magnetic ball and transmitter (4-20mA). Based on buoyance principle, the magnetic ball in the body of the level gauge is up or down with the liquid level changing and makes dual-colored turning to show the level of medium.

we can also make the liquid level measurement safe and reliable at the high temperature, high pressure, high viscosity, corrosive conditions.  Without blind spots, eye-catching display, intuitive readings, and measurement range at the measuring process. coupled with level alarm, the control switch can be realized level or interface level and the upper and lower alarm control, coupled liquid level transmitter can convert a signal of liquid level into 2-wires 4~20mADC standard signal, and achieve the detection, indication, recording and control of long-distance.

Magnetic level gauge is not limited to electric power, petroleum, chemical, metallurgy, environmental protection, shipping, construction, food and other industries in the production process.

install the wiring about magnetic Level gauge

So, How to correctly install the wiring about magnetic Level gauge?


First, we must correctly install the wiring before use the magnetic level gauge, it will lead to the wrong result of level measurement, even damage the level gauge. So it is very important for us to notice the following tips of how to correctly install the wiring:

1. should avoid large-capacity transformers, motors or sources of interference;

2. for explosion-proof level gauge, to ensure the explosion-proof performance, the wiring must be in accordance with relevant regulations;

3. Remove the wiring junction box cover, the cable through the cable glands, connected to 24VDC at both ends;

4. Need to connect the ground terminal;

5. Tighten the wiring box cover.

By the way, we also provide types of magnetic liquid level the top-mounted types magnetic level gauges, anti-crossion types magnetic level indicators, remote types of magnetic level indicators, etc. 

Guanghua Rd, Qingyang Dist, Chengdu, Sichuan Province, China 备案号:蜀ICP备13021392号-1