How to use magnetic level gauge correctly to extend it’s working life
Author:vacorda Source:vacorda.com Date: 2016-09-12 15:19:24
Magnetic flap level gauge in accordance with the principle of buoyancy and magnetic coupling effect developed. The whole process of measurement without blind spots, show eye-catching, intuitive readings, and it is not directly in contact with the liquid media, it can be used for the liquid level spot display or remote display and control in high temperature, explosion-proof, anti-corrosion, food and beverage occasions.
Vacorda magnetic level gauges are widely used in electric power, petroleum, chemical, metallurgy, environmental protection, shipbuilding, construction, food and other industries in the production process of liquid level measurement and control for open or pressure vessel. Based on its special design, these instruments are particularly suitable for use in aggressive, harmful or flammable media and harsh environments. It does not require electric power, you can choose to install electric remote or alarm limit switch.
Body of magnetic level gauge use seamless steel pipe, connecting pipe use the hole welding, no internal scratches. And it can be installed by side loaded types and top loaded types, the lower end of the body seal can be installed in accordance with the needs of sewage valve.
(Magnetic level gauge wait for export to the USA)
Continuous flange can be customized, in the installation, magnetic column level gauge must be kept in a vertical state, and the ball valve should be installed between the vessel, in order to facilitate the liquid level meter repair and demolition cleaning.
And for the measured liquid medium, should not contain solid impurities or magnetic substances, or it can lead to the float jamming easily and finally affect the accuracy of measurement.
In the choice of installation location, should avoid or be away from the import and export of material medium, to avoid rapid changes in the local area of the material fluid, affecting the accuracy of liquid level measurement.
(Factory application of level gauges)
And then slowly open the lower valve, so that the media smoothly into the main tube and observe whether the magnetic red and white ball overturn is normal, and then close the lower tube valve, open the drain valve, so that the main tube of the liquid level down, operation three times according to this method, if it is indeed normal, you can put into operation (corrosive and other special liquid exception).
For more use tips of magnetic level gauge, please continuous concerning our official website: www.vacorda.com