Level and Flow Measurement

+86 28 8701 3699

sales@vacorda.com

HOME> News

News
Contact us

E-mail: sales@vacorda.com

Factory:    0813-2629091

               0813-2629092

               0813-2629093

ChengDu:  028-87362258

               028-87362290

After-saler: 0813-3212061


Address: Guanghua Rd, Qingyang Dist, Chengdu, Sichuan Province, China

The working principle of orifice flowmeter

Author:    Source:    Date: 2021-05-20 17:10:54
1. Working principle
fa72656e
   The principle of flow measurement by the throttle device is based on the well-known principle of Baili Li's fluid mechanics. As shown in figure (1), when the throttle valve is placed on the pipe, a pressure difference (differential pressure P) will appear on both sides of the throttle valve. In this case, the flow rate is proportional to the square root of the differential pressure.

   In other words, curl:

   is formatting: A: constant

  C: Outflow coefficient

  : Diameter ratio (=d/D)

  D: Orifice diameter (mm)

  :Coefficient of expansion

  P: pressure difference before and after throttling (Pa): fluid density under working conditions (kg/m3)

   2. Principle structure diagram

  1, classification

   Classified according to flange clamping method

   (1) Welding (2) Flange fixture

   Classified according to pressure classification

   (1) Angle drilling pressure; (2) Corner annular chamber compression (3) Flange compression; (4) Diameter distance compression;

  , structure and schematic diagram

  1, flange 2, draft tube 3, front ring chamber 4, throttle valve 5, rear ring chamber 6, gasket 7, bolt 8, nut

Guanghua Rd, Qingyang Dist, Chengdu, Sichuan Province, China 备案号:蜀ICP备13021392号-1