Level and Flow Measurement

+86 28 8701 3699


HOME> News

Contact us

E-mail: sales@vacorda.com

Factory:    0813-2629091



ChengDu:  028-87362258


After-saler: 0813-3212061

Address: Guanghua Rd, Qingyang Dist, Chengdu, Sichuan Province, China

Which media in chemical plants can use electromagnetic flowmeters

Author:    Source:    Date: 2021-05-11 16:48:22
There are many types of media in chemical plants. For example, hydrochloric acid and nitric acid are relatively common media, which are corrosive or too high in chemical plants. Sulfuric acid is relatively corrosive, and ordinary flowmeters cannot be used. The most commonly used is electromagnetic flowmeter.

1. Hydrochloric acid

Hydrochloric acid can be found almost everywhere in chemical plants. Because it uses its special chemical composition, corrosive neutrality and electromagnetic flowmeter to measure more. Because it has a special room rate. Because the installation can be measured vertically and horizontally.

Because it is more acidic than other acids, the higher the requirements for concentrated sulfuric acid, sulfuric acid, and sulfuric acid, the higher the corrosion resistance. Due to the design characteristics of the electromagnetic flowmeter, the anticorrosive material is tetrafluoroethylene lining, so the electromagnetic flowmeter will be the first choice for the medium for measuring sulfuric acid. If the site environment is special, you can use a separate electromagnetic flowmeter to keep employees away from the sensor and put it in a safe place

In all production flows of chemical plants, not all production can use electromagnetic flowmeters. The medium named "hydrofluoric acid" is very corrosive, so the electromagnetic flowmeter cannot be used.

Guanghua Rd, Qingyang Dist, Chengdu, Sichuan Province, China 备案号:蜀ICP备13021392号-1