High Temperature Industrial Grade Reflective Sight Glass Level Gauge For Boiler

Short Description:

Center to center: 0~300 – 0~2000mm
Material: Carbon steel, 304, 316L
Nominal pressure: 2.5, 6.3MPa
Working temperature: 0~500℃


  • FOB Price: US $0.5 - 9,999 / Piece
  • Min.Order Quantity: 100 Piece/Pieces
  • Supply Ability: 10000 Piece/Pieces per Month
  • Product Detail

    Product Tags

    Product Description
    The glass plate liquid level meter is divided into three types: light-transmitting, reflective and mirror-type. The liquid level meter is mainly composed of a liquid level meter body, an upper valve (a steam valve), a lower valve (a liquid valve), a sewage plug (sewage valve), and an insurance steel ball. When the glass plate is damaged by splitting or the like, the safety steel ball automatically blocks the gas and liquid side valves to prevent or reduce the outflow of the medium, and is convenient for manually cutting the root valve of the liquid level meter for processing. The series is sturdy, reliable and easy to install. It is an ideal instrument for liquid level observation in various medium and low pressure vessels.
    The liquid level gauge is connected to the upper and lower flanges of the liquid level meter and the upper and lower flanges of the container to form a communicating device, so that the liquid level can be directly observed.
    This product implementation standard: HG 21588-21592-95

    8820220831151639
    Product Features
    1. Directly observe the liquid level position;
    2. It has a quick shut-off device for vapor and liquid leakage;
    3. Reasonable structure, simple installation and maintenance;
    4. Low maintenance costs;
    Main Technical Parameters
    1. Working pressure: ≤ 6.4MPa
    2. Working temperature: ≤250°C (specially up to 450°C)
    3. Center distance (mm): 550, 850, 1150, 1450, 1750 ± 1 ~ 5mm (the center distance is not in the above range of negotiated orders)
    4. Mounting flange sealing surface vertical plane error: ≤ 1mm
    5. Wetted material: 304, 316L, carbon steel
    6. Connection flange standard: HG20592-2009 (user can specify)

    Operation and Maintenance
    After the instrument is connected to the flange of the container, the pressure test shall be carried out according to the regulations, and the use shall be allowed only after the requirements are met.
    Preparation
    1. Open the drain valve (plug);
    2. Slowly open the upper valve (steam valve). When the temperature difference between the ambient temperature and the medium temperature is greater than 40 degrees, the liquid level meter must be preheated. After the temperature of the liquid level meter reaches the medium temperature, the valve can be opened gradually until all Open
    3. Slowly close the drain valve (plug), observe the level gauge and each joint, if there is leakage, it should be treated;
    4. After no leakage, slowly open the lower valve (water valve) to observe whether the water level is normal;
    5. Fully open the upper and lower valves to put the liquid level meter into operation
    Operation and Maintenance
    1. It is strictly forbidden to observe the water level during operation;
    2. Pay attention to the leakage of the sealing ring. If there is any leakage, it should be handled in time to avoid media leakage and injury;
    3. When the contamination inside the glass plate cannot be observed, close the vapor-liquid side valve and open the drain valve (plug). After the pressure is completely relieved and the medium is drained, the glass plate can be removed for cleaning. After re-installation, it must be confirmed. No leakage can be put into use;
    4. When the equipment is overhauled or the user makes the inspection cycle according to the corrosion and cleaning conditions of the liquid medium, check the safety steel ball in the upper and lower valves of the instrument. If there is corrosion, scaling, deformation, etc., it must be replaced immediately.

    850220831151707

  • Previous:
  • Next:

  • Write your message here and send it to us