The structure of the magnetic flap level gauge manufacturer’s level gauge is based on the principle of bypass pipe. The level in the main pipe of Sichuan VACORDA Instrument Manufacturing Co., Ltd. is consistent with the level in the container equipment. According to the Archimedes theorem, the buoyancy generated by the magnetic float in the liquid and the gravity balance float float float float on the liquid level. When the level in the measured container rises and falls, The rotary float in the main tube of the liquid level gauge also rises and falls with it. The permanent magnetic steel inside the float is driven by the magnetic coupling platform to flip the red and white column inside the indicator 180 °. When the liquid level rises, the column changes from white to red. When the liquid level drops, the feather column changes from red to red on the white indicator. The white boundary is the actual height of the medium liquid level in the container, thus achieving liquid level indication.
Characteristics of magnetic flap level gauge manufacturers’ level gauges:
1. Suitable for liquid level measurement of liquid media in containers, in addition to on-site display, it can also be equipped with remote transmitters, liquid level controllers, and other functions
2. The display is intuitive and eye-catching, and the display direction can be changed according to the request.
3. The magnetic flap level gauge manufacturer’s level gauge has a large measurement field and is not constrained by the height of the container.
4. The display component is completely isolated from the tested medium, so the sealing is good, reliable, and safe.
5. Easy to construct, convenient to install, and easy to maintain.
6. Corrosion resistant and explosion-proof.
During the initial on-site calibration of the magnetic flap level gauge manufacturer’s level gauge, it was occasionally found that the float was not flexible enough to move up and down, mostly due to improper installation. At this time, the magnetic flap level gauge should pay attention to whether the center of the upper and lower flanges is in line and perpendicular to the horizontal plane. Generally speaking, the angle between the float and the horizontal plane should not be less than 87 degrees. If the deviation is large, it may affect the smooth movement of the float.
The magnetic flap level gauge manufacturer’s level gauge can filter out ozone in compressed air, which is a relatively sophisticated technology. This type of magnetic flap level gauge is equipped with multiple layers of filter elements, mainly to ensure the filtration quality. The filtered air is free of oil and contains no impurities. Reaching the minimum residual oil content with a small amount of moisture, dust, and oil mist, which is not achievable with typical magnetic flap level gauges. Some industries need to ensure completion in high-quality air, and the technical advantages of magnetic flap level gauge manufacturers have solved the air quality problem for these industries.
Post time: 10-04-23