All of our Huikeda equipment will go through their own inspection or verification before leaving the factory, and the magnetic flap level gauge is no exception. Regardless of the pressure test or the temperature test of the level gauge, the magnetic compatibility of the internal float and the magnetic compatibility of the turning column need to be tested, and it will be assembled and shipped after there is no problem. However, in the future use, maintenance and maintenance are still needed, but the daily maintenance and maintenance of the magnetic flap level gauge is easy and simple. Today we will talk about the daily maintenance of the magnetic flap level gauge. Column calibration.The center line of the flange below the factory standard is the zero point, the center line of the above flange is the full degree, and the center distance between the two flanges is the range of use of the magnetic flap level gauge. If the user finds that the scale and the zero position are different from the actual level after the liquid has been injected, they can loosen the hose clamp, move the position of the flap, and adjust the position of the flap (scale) to correspond to the actual liquid level value.If you find that the columns are arranged in disorder on the flap, you can use a float to align the columns and move them from top to bottom before installation to make the columns neatly arranged. When the turning columns are arranged neatly and the bottom of the float is red and the above is white, the calibration is complete, and the changes of the turning columns can be observed by entering water or moving the float.These are all basic magnetic flap level gauges, but also produce level gauges for other occasions, such as electric heating magnetic flap level gauges that can measure liquid level in low temperature environments. For example, the remote magnetic flap can also solve the purpose of remote monitoring. Another example is the on-site alarm and remote control room alarm, which can also further remind on-site workers. Our method for developing and producing magnetic flap level gauges is to follow the market and pursue customer needs in order to make equipment that will not be eliminated by the market.
Post time: 21-09-21