When our production site needs to be equipped with a magnetic flap level meter, the next step is to select the magnetic flap level gauge according to the actual working conditions. With the advancement of technology and processing technology, the magnetic flap level meter There are also many types of products for position gauges, such as top-mounted type, side-mounted type, remote signal output, vacuum jacket insulation, steam jacket insulation, electric heating insulation, anti-corrosion, etc. How to choose the correct magnetic The flap level gauge is very important for correct measurement, and the selection of some supporting devices is also very useful for our later maintenance. Under normal circumstances, users should choose products with drain valves and drain valves, because In the process of use, it is inevitable that the inner cavity of the catheter where the float is also will be adsorbed by the dirt of the measuring medium, which will affect the normal operation of the magnetic float, which will directly cause the bounce and distortion of the panel display. At this time, if there is a drain valve, the problem can be easily solved by cleaning the inner cavity.1. The side-mounted type is usually selected for the installation of tanks. When there is a storage tank placed underground, in order to facilitate installation and observation, you need to choose a top-mounted magnetic flap level gauge2. If we not only need on-site observation but also remote observation and control, we need to install a remote signal device. Now our company’s products can provide 4-20mA, 485 communication, Modbus protocol and switch signal, Alarm function. Users can choose according to actual needs.3. In the winter in the northern region or when there are frequent low temperature conditions at the measurement site, we need to choose thermal insulation products. The thermal insulation products mainly include three types of vacuum jacket thermal insulation, steam jacket thermal insulation, and electric heating thermal insulation. The heating method is relatively flexible to install, and the steam jacket insulation type needs to be equipped with corresponding heating steam.4. When encountering the measurement of corrosive media, you need to consider the choice of anti-corrosion products. There are also many types of anti-corrosion products, such as PP material anti-corrosion, PVC material, tetrafluoroethylene lining anti-corrosion, of which tetrafluoro Lining has the best anti-corrosion effect, but the processing requirements are also high, and the price is slightly higher than other products. When selecting and matching, users should choose according to the type of media on site, and not necessarily choose the best, the best is appropriate, and the best price-performance ratio must be pursued.
Post time: 21-09-21