The magnetic turning column level gauge has a very broad application in our industrial production. Its capacity is based on the principle of buoyancy and the principle of magnetic coupling to achieve liquid level measurement. This magnetic working principle is possible in our daily work. It will affect the measurement accuracy and stability of the work, so under what conditions or working conditions may these problems be caused?
When we understand the problem of this factor, we must first know that the magnetic steel in our magnetic column level gauge has a certain degree of magnetism, and the magnetic flap level gauge is so attractive. This kind of design allows it to work stably in a vibrating environment, without the phenomenon of painted faces, and then the magnetic size of the magnetic steel of the magnetic turning column level gauge shall be appropriate. If the surface is relatively magnetic, turn the sheet The flipping force may not be enough. On the contrary, if the force is too small, the flipping film will be prone to fading during work! Therefore, there are requirements for the magnetic size of the magnetic steel in the flip.The above is an important factor and one that is more prominent. Other factors such as whether the processing of amine sheet and the assembly process are in place, whether the processing of the rotating shaft is rough, and the surface finish is sufficient. These are all factors that affect the product.
Post time: 21-09-21