In many special working conditions, the damage of the flowmeter is inevitable! How to quickly find the cause of the damage or improve the installation process according to the reason! Next, let’s talk about how to troubleshoot:1. Reasons for installation conditionsIt is summer, it is the season of thunder and lightning, stormy weather. For example, in the mineral water industry in the wild, or directly put the display instrument of the electromagnetic flowmeter in the wild! It may be because of thunder and lightning, raining weather destroys our electromagnetic flowmeter, especially the weather of lightning strike, once our electromagnetic flowmeter is struck by lightning, the instant high voltage of lightning will instantly destroy the meter! Electromagnetic flowmeters are inherently electromagnetic, so there is still a possibility that they may be struck by lightning in the field! There is also the erosion of heavy rain. If the product protection level is too garbage, there will be problems. The solution should be protected by lightning protection facilities for thunder and lightning, and for heavy rain, try to choose products with high protection levels as much as possible!2. With crops in the pipeline
Although our electromagnetic flowmeter has no obstructed parts in the pipeline, if it is said that the medium contains dirty things! Or it may cause the inner wall to begin to adhere to the medium. Then if the conductivity of the attached dielectric substance and the conductivity of the medium are good, if it is once the substance of the adhesion layer starts to change and becomes high conductivity, then it may be at this time The situation that causes a short circuit occurs; the solution is to clean up the adhesion layer according to the problem of the medium!
Post time: 21-09-21