For products such as magnetic flap level gauges, if there are multiple inaccuracies, it is because of errors in on-site operation or the parts of the entire product will be damaged during the initial installation. In this case, people may not know. Over time, their problems will be exposed. Therefore, in order to avoid inaccuracies during full use, it is best to understand how they can solve such inaccuracies before use.The scale plate rises according to the liquid position and flips the scale, but if the column is flipped, it is red, if not, it is whiteMost people know that if the dial itself is turned over during full use, the internal magnetic molecules have strong magnetism, and the magnetic force turned over during the ascent will be stronger. I know that in this case, the slab column will change from white to red and then to white, so the column that is easy to turn over will fail. As long as you use engineering waste and the like, you can separate the entire panel of the magnetic plate water level gauge from the main pipe by a short distance. In other words, it is better to clamp something similar to engineering waste between the panel and the main pipe.The scale of the magnetic flipping level gauge does not move at the time of the liquid level.
If such a problem occurs in the liquid level system of the purple spot plate, it may be because there is a stain inside, so this liquid level scale may not move when the turning plate scale stops. In this case, after the position of the liquid rises to 1 meter, it will not appear slowly. Just replace the panel.
Post time: 21-09-21