The magnetic flap level gauge produced by our company consists of a body, a flap box (composed of red and white two-color magnetic flaps), a float, a flange cover, etc., and is suitable for liquid level measurement of various liquid containers. The magnetic float in the main body moves up and down with the rise and fall of the liquid level, and at the same time drives the two-color magnetic plate in the outer indicator of the main body to turn over, turning red when there is liquid level, and turning white when there is no liquid level. The boundary between red and white represents the height of the liquid level. So that the liquid level indication appears clearer. It can be used in high temperature, explosion-proof, anti-corrosion, food and beverage and other occasions, as liquid level display or remote display and control. UHZ series products can achieve high sealing, anti-leakage and safe and reliable measurement of liquid level under high temperature, high pressure, high viscosity, and strong corrosive conditions. The whole process of measurement has no blind areas, eye-catching displays, intuitive readings, and a large measurement range. The upper liquid level alarm and control switch can realize the upper and lower limit alarm and control of the liquid level or interface level, and the liquid level can be adjusted with a liquid level transmitter. The boundary signal is converted into a two-wire 4-20mADC standard signal to realize remote detection, indication, recording and control. UHZ series magnetic flap level gauges are widely used for liquid level measurement and control in the production process of electric power, petroleum, chemical, metallurgy, environmental protection, shipbuilding, construction, food and other industries.How to correctly wire the magnetic flap level gauge? Before using the magnetic flap level gauge, it is necessary to do the wiring of the magnetic flap level gauge. If the connection is wrong, the measurement result will be inaccurate, and the serious will directly cause damage to the instrument, so we are doing the wiring operation. You must pay attention whenThe precautions are as follows: 1, avoid large-capacity transformers, motors or interference sources when wiring; 2, for explosion-proof type, in order to ensure explosion-proof performance, wiring must be in accordance with relevant regulations; 3, unscrew the terminal cover of the junction box , Pass the cable through the cable connector and connect it to both ends of the 24VDC; 4. Connect the grounding terminal as needed; 5. Tighten the terminal cover of the junction box. In addition: The company also produces: top-mounted magnetic flap level gauge, steel-lined PTFE level gauge, low temperature anti-frost magnetic flap level gauge, PVC magnetic flap level gauge, PP magnetic flap level gauge, belt Remote magnetic flap level gauge, magnetic flap level gauge with alarm, etc.
Post time: 21-09-21