The objects measured by the radar level gauge are very complex. If you don’t pay attention to it, it is easy to cause the influence and failure of the radar level gauge. Therefore, to use radar level timing in daily life, it is necessary to master some troubleshooting methods for radar level gauges. So, when the radar level gauge fails, how to checkFirst, check whether the power supply is normalWhen we use the radar liquid level timer and find that the liquid level rises to a certain value, it will become very slow. At this time, it is necessary to check whether the power supply of the radar level gauge is normal. During the daily use of the radar level gauge, check whether the power supply of the radar level gauge is normally output after power-on. In addition, the first time to check whether the fuse of the radar level gauge is malfunctioning, it will also affect the power supply of the radar level gauge.Second, check whether the communication equipment is normalWhen the communication equipment of the radar level gauge is found to be abnormal, we can install a radar debugging software to see if it can return to its normal state. When checking the communication equipment of the radar level gauge, it is mainly to check whether the radar sensor of the radar level gauge can accurately distinguish between reflected echo and false echoThe third is to check the use temperature
When the radar level gauge is in normal use, the temperature is not higher than 50 degrees Celsius, because the radar level gauge is mainly used to measure some high-temperature media. If the radar level gauge is higher than 50 degrees Celsius, the radar level gauge needs to be cooled.
Post time: 21-09-21