When measuring liquid level, you can use a magnetic float level gauge. This is the most commonly used level measuring device. The following describes how to install and maintain the steganography instrument. What are the characteristics of the magnetic float level gauge?
Magnetic float level gauge How to install and maintain the magnetic float level gauge? 1. When the user receives the product, he must carefully check the product to see if there is any damage during transportation and whether it is consistent with the order requirements. After checking, follow the steps below to install it correctly. The installation of the level gauge must be vertical to ensure that the float assembly can work freely up and down in the main pipe. 2) Do not allow the magnetic conductor to approach the body of the level gauge. Otherwise, it will directly affect the reliable operation of the level gauge operation f. Float and measuring tube are packed separately. Remove the bottom flange, make the upper part of the float upward, put the float into the measuring tube, and install the bottom flange. 3. After the level gauge is installed, it needs to be calibrated with a magnet, and it is turned over to make it red below the zero point and white above the zero point. The magnetic body of the float interacts with the magnet of the color bar of the display panel, and the color code is reversed. The red color indicates that there is liquid, and the white color indicates that there is no liquid. 4) When the liquid level gauge is working, the liquid medium quickly rises with the float assembly. In order to prevent the anti-column from incomplete rotation and random rotation, first open the pull-down liquid pipe valve to allow the liquid medium to enter the main pipe smoothly. When this phenomenon occurs, the liquid level can be recalibrated after the liquid level is stable.5) Before leaving the factory, take the airbag assembly out of the tube of the main body of the level gauge, open the smoke exhaust flange at the bottom after the level gauge is installed, and then reinstall the airbag assembly into the main body tube to avoid transportation Damage to the airbag module. Note that the heavy head of the airbag module faces up and cannot be turned over. If the airbag module is installed in the main pipe at the factory, you only need to fix the airbag module in the main pipe with a soft card, and pull out the soft card during installation to avoid damaging the color airbag module during transportation. 6. According to the condition of the medium, the discharge flange can be opened regularly to clean the sedimentation material of the main pipe. Magnetic float level gauge What are the characteristics of the magnetic float level gauge 1. High sensitivity (avoid the naphtha phenomenon of the panel), wide window), easy to see). 2. Continuous measurement of liquid level of various liquids and high temperature, high pressure, corrosive and flammable and explosive media. 3, on-site instructions, remote signal transmission (4~20mA or HART), one machine with multiple functions. 4. The display shows the liquid level in red, which is intuitive and eye-catching. 5. Wide measuring range, no dead angles in the whole measurement. 6. The monitor is completely isolated from the measured medium, which is safe and reliable. Many people want to know the characteristics of magnetic float level gauges. According to the editor, the biggest feature of the magnetic float level gauge is high sensitivity, wide measurement range, and continuous measurement.
Post time: 21-09-21