Intelligent electromagnetic flowmeter is an all-round intelligent flowmeter developed and developed with advanced technology at home and abroad. It is very different from old-fashioned analog or non-intelligent electromagnetic flowmeters, especially in measurement accuracy, reliability, stability, and use functions. And service life.To ensure the safe and stable operation of the intelligent electromagnetic flowmeter, better site conditions should be created, and the correct installation and debugging operations should be carried out in strict accordance with its technical requirements, and centralized management can be implemented to ensure the normal operation of the electromagnetic flowmeter and achieve continuous and accurate Metering.1. The instrument operator should be familiar with the working principle, performance characteristics, inspection points and inspection items of various instruments.2. The instrument operator regularly prints production reports and monitoring reports every day to reflect the production and operation conditions in the factory in a timely manner.3. Regularly conduct on-site inspections of the instruments at each inspection point and make records. Any abnormal situation should be handled and reported in time.4. When the instrument is inspected on site in rainy weather, the operator should pay attention to prevent electric shock.5. The primary sensors of various detection instruments should be cleaned and descaled as required.6. The printing mechanical parts of the microcomputer system should be lubricated regularly.7. When the detection instrument fails, the transmitter and converter shall not be disassembled or disassembled at will.8. Protective measures should be taken when inspecting and repairing instruments. For various instruments that have not been used for a long time or have been soaked in water due to improper use, they should be dried before being used.9. The computer software that is not used in the factory to run is strictly prohibited to run on the computer on the network. During operation, it is strictly prohibited to exit the computer software or insert a floppy disk.10. Regularly check and repair various components of the instrument, probes, converters, calculators, conduction TVs and secondary instruments, etc. Keep all parts intact, clean and free of rust. The scale of the dial scale is clear, the nameplate, markings and lead seals are intact; the central control room is tidy; the microcomputer system works normally: the instrument well is clean and there is no water accumulation.
Post time: 21-09-21