Last time we talked about the second working temperature requirement for the selection of the magnetic flap level gauge. Let’s continue to talk about those aspects that need to be clarified.3. Range The measurement range of the magnetic flap level gauge is the range of the center distance between the upper and lower flanges. The range is a parameter that must be confirmed when using the magnetic flap level gauge. If the range is selected incorrectly, then measure The data is definitely wrong, and the parameters of the magnetic flap level gauge of the corresponding size need to be determined.4. Installation method The installation method of the level gauge of the magnetic flap is mainly divided into two types: side-mounted and top-mounted. Side-mounted is one of the more installation methods used on tanks! When some need to be installed on the underground storage tank, you need to choose the top-mounted magnetic flap level gauge.5. Flange size The size of the flange refers to the size corresponding to the installation interface of the flange and the pipe. This also needs to be understood clearly before purchasing
6. Supporting requirements This talks about the magnetic flap level gauge with remote transmission, vacuum jacket insulation type, anti-corrosion type and so on. If we meet the needs of special working conditions, we need to figure out the required supporting requirements
Post time: 21-09-21