Although the use effect of the steam flow meter is very good, there are many precautions when using the steam flow meter. One of the more important points is that it must be installed properly. Only when the steam flow meter is properly installed can it be used correctly. However, steam flow meters have many requirements during installation. So, what are the basic requirements for installing a steam flow meter?First, during installation, the installation point of the steam flow meter should not have a large vibration source. If the vibration source is large, it will affect the use effect of the steam flow meter. In addition, when installing the steam flow meter, reinforcement measures must be taken to stabilize some pipes of the instrument accessories, so that the installation of the steam flow meter can become easier.2. When installing the steam flow meter, there is another point to note, that is, do not install it near large transformers, motors, and pumps, because these devices are prone to generate a certain magnetic field, which will have a certain impact on the use of the steam flow meter.Third, the steam flow meter should be installed vertically to make it easy to use when the sensor is connected to the pipeline. Therefore, this basic requirement must be met when installing a steam flow meter.In short, installing a steam flow meter needs to meet many basic requirements. Only when the basic requirements are met can the steam flow meter be installed correctly. At this time, the use of the steam flowmeter will be more reasonable, and there will be no bad conditions.
Post time: 21-09-21