In some industrial production, we will use a large number of precision instruments. When using these instruments, we must understand the parameters and methods of use of some instruments. So the following Huikoda instrument editor will introduce you to the magnetic suspension level meter installed on the top. What kind of instrument is the magnetic suspension level meter installed on the top?The maglev level gauge produced by Huikeda Instruments is another top (bottom installation) maglev level gauge that requires centralized control. It has the advantages of clear on-site indication and long transmission control. It can be widely used in petrochemicals, fertilizers, medicines, and ships. The liquid level indicator of various towers, storage tanks, storage tanks and spherical containers in the military and other industries.
Mount the magnetic suspension level gauge on the topThe working principle of the top-mounted magnetic levitation level gaugeThe buoy in the container (developed according to different media and pressures) floats up and down with the change of the liquid level of the downcomer, and moves the magnet up and down into the upper tube through the top rod, so that the outer flap is turned over and turned in red. The two colors of white and white indicate the height of the liquid level. At the same time, the liquid level transmitter sends a liquid level signal to the control center for liquid level indication and control, and it can also be centrally monitored by a computer.1. When the container is not suitable for side opening and the space around the container is very small, this type of level gauge can be installed on the upper or lower part of the container.2. Suitable for high viscosity liquid medium3. The viewing direction of the display can be changed arbitrarily.4. Other features are the same as the flying saucer zoneNotes on choosing the top-mounted maglev level gauge:1. Anti-corrosion nominal pressure ≤ 1.0MPa.2. The level gauge has a certain blind zone. When reading the height of the level, the blind zone value compensation should be added (when the level gauge leaves the factory, the scale zero has been moved to the actual value).3. The range of the level gauge should not exceed 5 meters, otherwise the stability, reliability and color fastness of the level gauge will be affected.4. Install the connecting flange, which is usually manufactured by the protruding surface dimension reference (HG 21592-97).Installation, use and maintenance of the top-mounted magnetic levitation level gauge:1. The protection pipe of the level gauge and the main pipe must be kept vertical.2. The connecting rod cannot be bent and must be inserted straight3. After installation, use the magnet to guide the display to flip the column once, and the white is above zero and the red is below zero.Precision instruments such as the maglev level gauge installed on the top must be selected according to the ratio of the three kinds of goods, otherwise it may cause irreparable errors. If you want to know more, welcome to visit our website for a long time.
Post time: 21-09-21