Among various level gauges, ultrasonic level gauges are one of the more advanced instruments and have a wide range of applications. The following Huikeda instrument will work with you to understand the application range of the integrated ultrasonic level gauge. What is its installation principle?
Integrated ultrasonic level gaugeIntegrated installation principle of ultrasonic level gauge1. The distance from the emitting surface of the sensor to the lowest liquid level should be less than the measuring range of the selected instrument.2. The distance from the emitting surface of the sensor to the highest liquid level should be greater than the blind zone of the selection and purchase of the instrument.3. The emitting surface of the sensor should be parallel to the liquid surface.4. The installation position of the sensor should avoid the fluctuation of the liquid level as much as possible, such as the water inlet and outlet.5. If the pool or tank wall is not smooth, the instrument should keep the pool or tank wall above 0.3m.6. If the distance from the transmitter surface of the sensor to the highest liquid level is less than the blind zone of the selected instrument, a telescopic tube should be installed, the diameter of which is greater than 120 mm, the length is 0.35m ≤ 0.50m, the vertical installation, the inner wall is smooth, and the inner hole of the tank should be Greater than the inner diameter of the extension tube. Or the pipe can be directly connected to the bottom of the tank, the pipe diameter is greater than 80 mm, and the hole at the bottom of the pipe can easily flow into liquid.Integrated ultrasonic level gaugeApplication range of GB/T1497-1993 integrated ultrasonic level gaugeThe integrated ultrasonic level gauge has a wide range of applications and is very suitable for storage tanks, pools, reservoirs and other fields. Through the introduction of the editor, we must know the installation principle of the integrated ultrasonic level gauge.
Post time: 21-09-21