As a typical level meter, the anti-rotation level meter is widely used in enterprise production. According to its use, it is also known as the anti-rotation level gauge or the anti-rotation level switch. The anti-rotation level switch uses an AC micromotor to drive the detection blade to rotate slowly after deceleration.When the level of the measured material rises and the rotation of the blade is blocked, the main shaft of the detection mechanism produces a rotational displacement. This displacement firstly causes a micro switch to act and sends out a signal of material. Then another micro switch acts to cut off the power of the micro motor to stop its rotation. As long as the material level in the silo remains unchanged, this state will be maintained.When the material level drops and the detection blade loses its obstruction, the detection mechanism relies on the spring tension to return to its original state. Control the action of the micro switch of the micro motor power supply, so that the motor is energized and rotated. Then another micro switch action sends a signal, as long as there is no material blocking the rotation of the detection blade, this state will be maintained.The use and characteristics of anti-rotation level instrument1. The main exposed parts are made of stainless steel, aluminum alloy and engineering plastics. It has the characteristics of corrosion resistance, pollution-free, moisture-proof, dust-proof, etc., can be used in harsh environments such as grain storage and industrial high dust;2. In order to adapt to the different specific gravity of various materials and to facilitate installation and adjustment, a sensitivity five-level adjustment device, two optional installation methods and multiple detection blade specifications are set;3. The anti-rotation level switch adopts a heat dissipation device, so it can be used in a material environment ≤250℃ (currently some capacitors, tuning forks, and ultrasonic level detection devices cannot adapt to this high temperature). With on-site material level status indicator.Notes on the use of the anti-rotation level gaugeScope of application: Rotation resistance level gauge, mainly used for level monitoring or control of open containers and powdery and granular materials without liquid leakage (when mounted on the side). It is not suitable for use in pressurized closed containers or materials with flammable volatile gas.Tips for Choosing Rotation Level GaugeBecause different occasions and different media have different requirements for the correct measurement of the material level, in order to use the resistance-rotation level switch correctly, we should pay attention to the following points when purchasing.
1. In order to meet the needs of certain seepage or high adhesion materials (such as asphalt, concrete, etc.), vertical installation on the top (measuring depth up to 10 meters or more) can be selected. Hard shaft. When the measuring depth is > 1 meter, the extended flexible shaft should be selected. When the measuring depth is less than or equal to 1 meter, a rigid extension shaft can be used. Note: Since the material has no contact with the root of the output shaft of the leveler during overhead installation, there are very few failures during operation. Where the installation location permits, the overhead vertical installation should be adopted as far as possible. 2. The extended type (with stainless steel sheath and extended shaft) can also be customized for side mounting.
Post time: 21-09-21