The principle and technology of the electric remote transmission level gauge is that there is an inner tube inside the casing. The outer wall of the inner tube is double-wired from top to bottom for a circle of insulation resistance. The outer metal body of the winding layer will be exposed. The two end points are linked, and the lower two end points will be reflected from the inner tube through a wire. The connection terminal, the inner tube jacket is equipped with a liquid level and a tracker. It is a tracking ring made of magnetic materials and slip rings on both sides.principle
The principle of the electric remote transmission liquid level gauge is a device for liquid level measurement developed by the combination of the principle of magnetism, the law of buoyancy, and other principles. It forms a communicating device through flanges or other interfaces and the subject and container. ; In this way, the liquid level in its cavity is at the same height as the liquid level in the container, and the floating ball inside follows the rise and fall of the container page to produce corresponding changes. This is the principle of the general magnetic flap level gauge The work is the same, but the difference is that the remote transmission has added a magnetic switch on the basis of this column level gauge. The magnetic switch signal can be used to control the change of the liquid level while detecting the liquid level. Or alarm, remote transmission is based on the magnetic column level gauge, a transmitter sensor at home, which converts the liquid level into a unit of 4-20mA and sends it to the control or computer.
Post time: 21-09-21