What are the advantages of the electric remote control magnetic level gauge? Installation Precautions

The electric remote magnetic flap level gauge is modified on the basis of the ordinary magnetic flap level gauge. It can be fully automated when in use, and the monitoring value can be sent directly to the observer. So what should be paid attention to when installing electric remote control magnetic flap liquid level timing? Tell everyone nowWhat are the advantages of electric remote magnetic flap level gaugeElectric remote magnetic flap level gauge is a common level gauge product, which is widely used in electric power, petroleum, chemical industry, metallurgy and other industries. Environmental protection and other industries are responsible for various towers, tanks, tanks, spherical tanks, boilers, etc. in the production process. The medium level of the equipment is detected and controlled. It has the advantages of simple structure, intuitive observation, clear, no blockage, no leakage, convenient installation, simple maintenance, flexible use, etc., stable performance and high reliabilityMatters needing attention when installing electric remote magnetic flap level meter1. To install the level meter with remote magnetic flap, the remote transmitter should be close to the main pipe of the magnetic flap level gauge and fixed with stainless steel hose clamps. It is strictly forbidden to use an iron at this time, so as not to affect the normal operation of the instrument2. Install the liquid level meter with remote magnetic flap, the magnetic induction surface of the remote transmitter should face and be close to the buoy3 of the outer wall. Install a liquid level meter with remote magnetic flap, pay attention to keeping the remote zero position and the zero indicator of the magnetic flap level gauge at the same liquid level4. When installing, the wiring between the remote transmitter and the display instrument or industrial computer should use a protective tube or a shielded two-core cable5 Lay separately. After the wiring hole of the junction box is laid, pay attention to check whether the seal is good to prevent rain, moisture, moisture, etc. from intruding, dust, etc., so that the remote control transmitter cannot work normally. In addition, after maintenance or debugging, the junction box should be covered in timeWhat is the working principle of the remote magnetic flap level gaugeBecause the remote magnetic flap level gauge is composed of a magnetic flap level gauge and a reed remote transmitter, combining the two components of the magnetic flap level gauge &1 introduces the working principle of the magnetic flap level gauge. The basic type of magnetic flap level gauge is a magnetic flap level gauge, also known as a magnetic float level gauge. Based on the structure of the connector, the principle of buoyancy and the magnetic coupling characteristics, real-time measurement of the liquid level is realized. When the liquid level in the measured container rises or falls, the magnetic float used to sense the change of the liquid level in the main measuring tube will also rise or fall. The permanent magnet steel in the float drives the magnetic flap outside the main measuring tube to flip 180&; 180 flux magnetic coupling; the two sides of the valve are painted with different colors (usually red and white) to indicate the position of the liquid level. When the liquid level in the container rises, the valve changes from white to red. When the liquid level in the container drops, the valve changes from red to white. The red and white junction of the indicator is the actual height of the liquid level in the container, so as to realize the accurate measurement and local display of the liquid level.