What are the measurement conditions of the intelligent radar level gauge?

In the process, the radar receives the energy emission as a wave. In the signal conversion at the same time ” the antenna of the launching position can be calculated. Generally speaking, it is smart, launching, and lower than the liquid. The radar system reduces the actual energy of the microwave itself. The speed of light can be launched and run through the liquid launching radar. One kind of pass-through operation is an intelligent low-time pulse electronic component. It is very scientific and stable for existing applications and the field of time to measure it. Most of the time this extends the most internal product liquid. The measurement of time is very accurate. This is a smart way to ensure that it is effective. Advanced radar can be used by everyone, especially in the short-term of passing the calculation, and is widely interested in this condition.The measuring conditions and measuring ranges of intelligent radar level gauges are different. Secondly, the measurement range is basically calculated from a point at the bottom of most bottom layers, but under special circumstances, if the bottom of the entire tank is O-shaped or cone-shaped, when the object level is below this point, it will not be at all. It may be measured in a short time.If the whole medium is a low-boundary medium, when the whole medium is at the lowest liquid position, the bottom is relatively low, which is visible in this case. In this case, the accuracy of the measurement can be effectively guaranteed, and it is recommended Set the zero point at a lower height.Theoretically speaking, the position of the tip of the antenna measured by the smart radar level gauge should consider the influence of corrosion or other factors, and the median of the measurement range should be at least 100 mm away from the tip of the antenna.


Post time: 21-09-21