The level gauge of the magnetic flap is a relatively small level gauge in the entire level gauge market. It has the characteristics of being suitable for a variety of industrial controls, simple installation, simple maintenance, and affordable. In summary, it is because Its product is very cost-effective, so many people use it, so in our daily use, everyone may not know the structural characteristics of the magnetic flap level gauge. Here is a brief chat for everyone.1. Basic typeThe level gauge of the magnetic flap is based on the principle of magnetic buoyancy. The float will move with the rise and fall of the liquid level in the measured pipe, and the permanent magnet in the float will act as a coupling to drive the color film turning column to reverse. At 180°, when the liquid level rises, it will gradually turn from white to red, and when it falls, it will turn from red to white! This is the display indication of the level gauge.2. Remote transmission
We can install a transmitter on the magnetic flap level gauge. The general transmitter is composed of a sensor and a converter. It moves up and down through the magnetic float. It will drink when the magnetic coupling measurement is done. The signal change of the resistance is then received and converted into a standard current signal output of 4 to 20 mA, which is transmitted to the remote digital display or calculator, so that remote transmission is realized.
Post time: 21-09-21