The water level gauge is a widely used liquid measuring device, divided into various types. For example, magnetic levitation water level gauges are common. Let’s take a look at what Kaida’s instrument is a magnetic levitation level gauge, and what is the troubleshooting method.Troubleshooting of Magnetic Float Level Gauge
What is a magnetic float level gaugeThe magnetic level gauge has the advantages of intuitive display, eye-catching, no power supply, convenient installation, less maintenance, and low maintenance cost. It is an updated product of glass tube and glass plate level gauges. It can be widely used in the liquid level detection of storage tanks, storage tanks, storage tanks and other containers in petroleum, chemical, power plants, pharmaceuticals, metallurgy, shipbuilding industry, water/sewage treatment and other industries. The series of magnetic levitation level gauges and the container under test form a communicating device to ensure that the liquid level between the container under test and the measuring tube body is equal. When the float in the measuring tube of the liquid level gauge changes with the measured liquid level, the magnetic body in the float interacts with the magnetic body in the color code displayed on the display bar and reverses, so that red means there is liquid and white means no The purpose of accurately displaying the liquid level on the spot.Troubleshooting of Magnetic Float Level GaugeTroubleshooting method of magnetic float level gauge1. There is liquid in the container, but there is no display. The reason is sometimes that the density of the medium changes; the float is broken; the connection part of the is blocked. The solution is to replace the float and unblock the connecting pipe.2. False liquid level phenomenon often occurs. The reason is that small impurities sometimes produce bubbles in the processing of the measuring medium; the magnetic properties of the float and the magnetic reversal plate become weak; the dry yellow tube switch has a problem. The solution is to pollute the float regularly. If the magnetic force is weakened, you can use the magnetic rod to go back and forth several times to increase the magnetic force. When there is a problem with the trunk, you can only use a multimeter to measure the damaged part and then shield it.3. It may appear if it is telexed. The results of on-site and telex are different. In this case, we must first check whether there is a problem with the float, then see if it is a teletype converter, and finally check our wiring and our system. The solution is to turn it on after the pollution is discharged, check the float, then measure the current signal with a multimeter, confirm that there is no problem with the system and wiring, and finally calibrate our converter. Match the router data with the data we uploaded.Magnetic float level gauge can be used in petroleum, chemical, power station and other fields. Through the introduction of the editor, you know what is the troubleshooting method of the magnetic float level gauge.
Post time: 21-09-21