What is the working principle of the anti-corrosion float level gauge?

All kinds of equipment are needed in the factory. With these devices, our work efficiency can be faster. For example, anti-corrosion float level gauges are often used in factories. What is the working principle of anti-corrosion float level gauges?Anticorrosive ball level gaugeThe anti-corrosion float level gauge is mainly composed of three parts: magnetic levitation ball, sensor and transmitter. When the magnetic levitation ball moves up and down along the pipe with the level of the liquid level, the magnetic steel in the levitation ball adsorbs the clarinet at the corresponding position in the sensor, so that the total resistance (or voltage) of the sensor changes, and the transmitter emits the changed resistance ) Or voltage) signal 4-220Anticorrosive ball level gaugeFloat level gaugeThe float level gauge uses a magnetic levitation ball as the measuring element, and the resistance in the sensor changes linearly through magnetic coupling. The resistance change is converted into a 4-20mA standard current signal through an intelligent converter, and the percentage of the liquid level, 4~ 20mA current and liquid level value, remotely supplied to the control room. This instrument is suitable for sewage treatment in petroleum, chemical, electric power, light industry, medicine and other industries and the measurement of medium level in various atmospheric and pressure vessels, especially for underground Liquid level measurement of storage tanks and oil storage tanks.Anticorrosive ball level gaugeThe working principle of anti-corrosion ball level gaugeThe working principle of the anticorrosive float level gauge The floating ball with the structure of the utility model breaks through the traditional float level gauge. It is a technical idea that the density of the float is single, consistent with the density of the turbulent layer, and must be located in the turbulent layer to measure the liquid level. The turbulent layer is fluctuating, its density changes with time, and the density of the lower tar layer is basically unchanged. Therefore, the floating ball of the structure of the present invention is divided into two parts, one is the open floating part, and the density of the lower liquid tar layer is basically the same. Consistent; The other is the floating part. The density of the upper liquid and the anti-corrosion float level gauge are equivalent to the float as the layer, which is consistent with the measured liquid state. No matter how the turbulent layer changes with the tar, the density of the upper and lower floating parts of the float of the structure of the present invention is uniform, so the liquid level of the lower liquid tar layer is the place where the lower floating part and the upper floating part intersect.The above is the description of the conch about the anti-corrosion float level gauge. Those who need it, please refer to adopt it. In addition, if you don’t understand, please visit a professional website.