In many industries, some machines are often needed. These machines play an important role. For example, the liquid ammonia magnetic flip plate level gauge can achieve high-sealing and leak-proof level measurement. Then the liquid ammonia magnetic flip plate level gauge How does it work?Liquid ammonia magnetic flap level gaugeThe special magnetic flap level gauge for liquid ammonia can be used for high-sealing, leak-proof and safe and reliable level measurement under high temperature, high pressure, high viscosity, and strong corrosion conditions. In the whole process, there is no blind zone, the display is prominent, the reading is intuitive, and the measurement range is wide. Using liquid level alarm and control switch, the upper and lower limit value alarm and control of liquid level or boundary position are realized. Using a liquid level transmitter, the liquid level boundary signal can be converted into a standard signal of 4-20 mADC to realize remote detection, indication, recording and control. It is widely used in various towers, tanks, tanks, spherical vessels and boiler equipment in petroleum, chemical, pharmaceutical, food and other industries.The working principle of the special magnetic flap level gauge for liquid ammoniaA new type of instrument, the magnetic steel in the float drives the flip of a two-color thin plate to indicate the liquid level. The magnetic float in the main body of the magnetic flip plate liquid level gauge moves up and down with the rise and fall of the liquid level, and at the same time drives the two-color flakes in the external indicator of the main body to flip, turning red when there is a liquid level, and white when there is no liquid level. The boundary between the red and white bands represents the height of the liquid level. An eye-catching scale is set on the left side of the indicator. In order to make the liquid level indication clearer.Liquid ammonia magnetic flap level gaugeTechnical parameters of special magnetic flap level gauge for liquid ammoniaMeasuring range: side 0-200mm, 0≤18000 mm; top installation: 0-200mm, 0-6000 mm, please specify the requirements beyond the above data. Measurement accuracy: &plusmN; 10 mm; medium density: ≥ 0.5g/cm3; working pressure: 1.0, 1.6, 2.5, 4.0 MPa; working temperature: A≥80℃, B≤120℃, C≤300 ℃; medium viscosity: ≤ 0.4Pa.S (the medium that is easy to crystallize when the jacket is heated under medium conditions); the specific gravity difference of the measuring boundary position: ≥ the size of the factory connecting flange 0.15g/cm3: DN20PN2.5 (metric system Pipe); The connecting flange adopts the HG20592-20635-97 flange standard promulgated by the Ministry of Chemical Industry in 1998. If other flange standards are used, please specify when ordering. Flange connection hole distribution shape: square.
Post time: 21-09-21