The use effect of capacitive pressure transmitter is very ideal, the stability of the equipment during the measurement process is very high, the accuracy of the equipment is also very high, and the scope of use is also very wide, but even the products with strong functions are also in the process of use. There will be failures, therefore, for users, how to deal with the product at the time of failure is very important.(1) Well done in the inspection of measuring partsWhen there is a problem with the use of capacitive pressure transmitter products, it is very important to do a good job of detection during use. Only after the inspection can you know where the problem is. The probability of a problem in the measurement part is very high. Therefore, the flange, Compensation boards, circuits, etc. must be carefully inspected. Only by doing these inspections can the overall use of the product be better.2); The detection of the circuit is very important.In order to better check the problems in the use of the product, in the actual inspection, the circuit condition has become a problem that must be considered. In many cases, there are breaks or other abnormal problems in the circuit. After passing the inspection, we can determine whether there is a problem in this area. If this is the case, we should take appropriate measures in a timely manner to resolve it.Taking into account the use of capacitive pressure transmitter products, it can be seen that once the product fails, a very suitable method must be adopted. In the actual inspection, special attention should be paid to the overall product in the production line design and process. Each part must be carefully considered, and the final use effect is the best.
Post time: 21-09-21