In daily life, we often need to measure the depth of a certain liquid. We can’t measure it with an ordinary ruler. The most commonly used is the magnetic levitation level gauge. Today, let Huikeda Instruments introduce you to how to handle the magnetic levitation level gauge carton.How to deal with the carton of the magnetic level gaugeOne of the common reasons for the common failures of the magnetic flap level gauge is that the float is dirty, and the other reason is the viscosity and crystallinity of the medium.When the float cannot be blocked, our usual method is to remove the flange under the float level gauge and take out the float for manual cleaning and decontamination. This maintenance work is very dirty. When measuring various corrosive media (such as various lye, acid, acid gas tanks, gases or various corrosive industrial media), we often get injured due to the corrosive media on the body during the maintenance process. The volatilization of toxic gases can also cause harm to the human body. Therefore, maintenance and removal of floats for cleaning is a more dangerous task. At this time, we should take precautions in advance.How to deal with the carton of the magnetic level gaugeThe work of the magnetic suspension level gaugeThe magnetic suspension type liquid level gauge and the container to be measured form a connecting device to ensure that the liquid level between the container to be measured and the measuring tube body is equal. When the float in the measuring tube of the level gauge changes with the measured liquid level, the magnet in the float interacts with the magnet in the display color code on the display bar to turn it over. Red means liquid, and white means no liquid. Accurately display the purpose of the liquid level.According to the needs of the project, the user can also cooperate with the magnetron level gauge, on-site digital display, or output 4-20 mA standard remote electrical signal to meet the needs of recorders or industrial process control, and can also be close to or close to the magnetron switch The switch is used in conjunction to monitor and alarm the liquid level, or to control the liquid import and export equipment.How to deal with the carton of the magnetic level gaugeHow to install the magnetic suspension level gauge1. When receiving the product, the user should carefully check whether the product is damaged during transportation and check whether it meets the requirements of the order. After the inspection, the condition is good, please install it in the following order accurately.2. Float and measuring tube are packaged separately. Remove the bottom flange, keep the top of the float upward, install the float into the measuring tube, and install the bottom flange. Then connect it to the container under test.3. The magnetic body in the float interacts with the magnet in the color bar on the display panel, the color code is reversed, red means liquid, and white means no liquid.How to deal with the magnetic suspension level gauge carton? After reading the above content, the main reason is that the float is dirty or the medium is thick, which leads to crystallization. It is recommended to be careful when removing the float level meter.
Post time: 21-09-21