There are many types of media in chemical plants. For example, hydrochloric acid and nitric acid are relatively common media, which are corrosive or too high in chemical plants. Sulfuric acid is relatively corrosive, and ordinary flowmeters cannot be used. The most commonly used is electromagnetic flowmeter.1. Hydrochloric acidHydrochloric acid can be found almost everywhere in chemical plants. Because it uses its special chemical composition, corrosive neutrality and electromagnetic flowmeter to measure more. Because it has a special room rate. Because the installation can be measured vertically and horizontally.Because it is more acidic than other acids, the higher the requirements for concentrated sulfuric acid, sulfuric acid, and sulfuric acid, the higher the corrosion resistance. Due to the design characteristics of the electromagnetic flowmeter, the anticorrosive material is tetrafluoroethylene lining, so the electromagnetic flowmeter will be the first choice for the medium for measuring sulfuric acid. If the site environment is special, you can use a separate electromagnetic flowmeter to keep employees away from the sensor and put it in a safe placeIn all production flows of chemical plants, not all production can use electromagnetic flowmeters. The medium named “hydrofluoric acid” is very corrosive, so the electromagnetic flowmeter cannot be used.
Post time: 21-09-21