The sealing design of the display panel of the magnetic flap level gauge is very important, and the display panels of many magnetic flap level gauges in our country are not sealed yet. Many of them are directly fixed with two modified versions and fixed with screws. Sealing measures. One but our magnetic flap level gauge panel is not sealed well or may have the following problems in early summer:1. If the display panel is not tightly sealed, the magnetic flap of the magnetic flap level gauge will turn abnormallyThe seal of our magnetic flap level gauge is not in place. Rain and dust in the environment will enter the display part, which may make the surface of our magnetic flap become damp, but the dust will adhere to the surface once the dust arrives. It will definitely affect the flip to our magnetic flip to a certain extent, and it is more likely to be frozen in winter or in a low temperature environment. The flip will fail and the entire product cannot be used!2. The display panel is not tightly sealed, which will reduce the visibility of our magnetic flap level gauge. In a low temperature environment, the water vapor in the display part may be condensed and frosted on the surface of the protective cover, and then we read directly Will definitely affect our product resolution
3. The display panel is not tightly sealed, which may allow foreign objects to enter so that the magnetic flip can not be turned over. This is similar to the first reason, but the dirt inside may become fungi or flying insects that breed in a humid environment. , Over time may hinder the rotation of the magnetic flap!
Post time: 21-09-21