INDUSTRY APPLICATION
Common types and principles of float type liquid level switches
2024-05-23
The technical advantages of a float type liquid level switch: The float switch does not contain components such as bellows, springs, and seals that cause faults to occur. But instead, a straight float is used to drive the internal magnet of the switch, and the simple lever of the float switch makes the switch act instantly. The cantilever angle limit design of the float prevents the float from being vertical.
Installation method of V-cone flowmeter
2024-05-23
The V-cone flowmeter is mainly used for measuring the flow of liquid, fixed, and gas. Compared to the selection method, the installation method of the V-cone flowmeter is relatively simple. The installation of the V-cone flowmeter has already been planned during the selection process. Therefore, when receiving the V-cone flowmeter, it only needs to be installed according to the user manual. This article lists several key points to pay attention to when installing the V-cone flowmeter.
Technical requirements for various parameters of electromagnetic flow meters
2024-05-23
As one of the industrial flow measurement instruments, electromagnetic flow meters have certain skills and precautions when selecting. I hope it can help to choose an electromagnetic flowmeter correctly.
The difference between volumetric flow rate and mass flow rate in the measurement of flow meters
2024-05-23
In the measurement of flow meters, it is generally necessary to involve measuring the volume flow rate and mass flow rate of the medium. So, what are the differences between these two flow units, and what are the corresponding flow meters to choose for different flow units? This article combines the article of engineers from the imported flow meter brand VTON in the flow meter forum to conduct a comprehensive analysis.
How to convert the gas volume used in the flow measurement of a glass rotor flowmeter
2024-05-23
Does everyone have a clear understanding of how glass rotary flow meters achieve gas volume conversion in flow measurement? Faced with this, the editor has comprehensively sorted out the details of the following points. Now let’s take a look at what they all look like together?
How to debug radar level gauge
2024-05-23
The debugging of a radar level gauge generally includes the following steps:1. Preparation work: Confirm the model, specifications, and installation position of the radar level gauge, and ensure that the installation environment is free of interference sources, such as electromagnetic interference, radio frequency interference, etc. At the same time, ensure that the device’s power supply is stable and the signal line is well connected.
Address：No. 41 Chengxi Road, Yantan Industrial Park, Zigong, Sichuan Province, China
E-mail：sales@vacorda.com
Copyright © 2024 Sichuan VACORDA Instruments Manufacturing Co., Ltd.
