HKDYC Smart Anti-explosion Design Mini Vibrating Level Switch
Item Tuning Fork Level Switch
Model HKD-YC302P2S1LD
Medium Sea Water/Liquid/Particles and Powders
Contact Liquid Material SS316L
Work Temperature -40℃~80℃
Work Pressure ≤6.4MPa
Insertion Depth 122mm (Fork length: 100mm, thread length: 22mm)
Process Connection 1" parallel thread (BSPP)
Power Supply 24VDC
Output Signal PNP
Electrical Interface Hirschmann splice
A variety of input and output, practical and simple, reliable, and applicability
Category：
Keywords：
Product Details
Product Instructions
Tuning fork vibrating level switches, by resonant piezoelectric crystal to cause their vibration,When subjected to material damping. Drastically reduced the amplitude and the frequency and phase of significant change. These changes will be detected by the internal electronic circuits, and then after treatment, converted into a switching signal.
Product Features
It is practical and simple, reliable, and applicability;
Tuning fork and output were working condition, all with LED indication;
It may indicate that under customary adjustment;
A variety of input and output.
Product Parameter
| Fluid: | Liquid, Powder, Particle |
| Rod Length: | Standard: 250mm100-3000mm optional |
| Rod Material: | SS304, SS316L |
| Fluid temperature: | -40℃~130℃ |
| Ambient temperature: | -40℃~80℃ |
| Working pressure | ≤2.5MPa |
| Fluid density: | Particle ≥ 0.1 g/cm3 |
| Liquid ≥ 0.7 g/cm3 | |
| Particle diameter: | ≤1 0 mm |
| Signal Output: | Relay output， 3A/220VAC |
| Delay Time: | 1-60s Adjustable |
| Process Connection: | 1" parallel thread (BSPP) |
| Enclosure: | IP65 |
Product Application
Tuning fork switches are usually used with level meters to control and measure materials. It is mainly aimed at the powder and small particle materials with a wide range of density, such as the detection of inlet and outlet pipe blockage of the dust collector, the material level measurement of the ash hopper of the dust collector, and the limit measurement of plastics, rubber powder, flour, various grain crops, food, chemical products and so on. For all kinds of liquids, such as slurry, sticky, easy to foam, corrosive and other media limit detection.
1. Strong adaptability - different electrical parameters and densities of the tested materials have no impact on the measurement. Harsh conditions such as scaling, agitation, turbulence, bubbles, vibration, medium viscosity, high temperature and high pressure also have no impact on the detection.
2. Maintenance free - since the detection process of tuning fork limit switch is completed by electronic circuit and there are no moving parts, maintenance is not required once it is installed and put into operation.
3. No need for adjustment - since the detection of tuning fork limit switch is not affected by the electrical parameters and density of the measured medium, no matter what liquid is measured, it does not need to be adjusted on site.
Contact Us
Sichuan VACORDA Instrument Manufacturing Co., Ltd.
E-mail： sales@vacorda.com
Tel: 0086-028-87362258
7X24 hours online
Address： Guanghua Rd, Qingyang Dist, Chengdu, Sichuan Province, China
Related Application
Hot Products
Address：Guanghua Rd, Qingyang Dist, Chengdu, Sichuan Province, China
E-mail：sales@vacorda.com
Copyright © 2024 Sichuan VACORDA Instruments Manufacturing Co., Ltd.
