LWY Separated Remote LVD Display Turbine Flow Meter

+
  • undefined

Nominal Diameter                                           DN6~DN200
Medium                                                           Clean liquid, such as water, oil...
Viscosity                                                           5~400mpa.s 
Operating Temperature                                    -20~120℃ 
Nominal Pressure                                             PN16~PN63 
Flow Range                                                       ≤1200m3/h
Accuracy                                                            0.5, 1.0, 1.5
Body Material                                                    304, 321, 316L
Impeller Material                                               2Cr13, Dual-phase steel 
Ambient Temperature                                       -20~60℃; RH:5~90%
Signal Output                                                    Pulse, 4~20mA, RS485, HART
Working Power                                                  24VDC±15%
                                                                          Li-battery 3.6V10AH (No signal output)
Explosion Proof                                                 ExdⅡBT4;   Protection grade: IP65
Electric Interface                                                M20×1.5 
Process Connection                                           Flange or thread connection
 


High Accuracy, Insert Type, Anti-Interference and Anti-Vibration, Pulse Signal Output

Keywords:

Inquiry

Product Details


Description
LWYB series turbine flow meters, based on the torque balance principle, belong to the speed flow meter. The sensor has the characteristics of simple structure, light skill, high accuracy, good recovery, sensitive response, convenient installation and maintenance and use. The turbine flow meter is suitable for measuring liquids or gases compatible with stainless steel 1Cr1-8Ni9Ti, 2Cr13, Corundum Al2O3 and carbide and free of impurities such as fibers and particles. The sensor is suitable for medium with viscosity less than 5*10-6 m²/s. For liquid with viscosity greater than 5*10-6 m²/s, the sensor should be calibrated with the real measured liquid.
Working Principle
When the measured liquid flows through the sensor, because the impeller blade has a fixed Angle with the flow direction, the impeller receives the kinetic energy of the fluid under the action of the fluid, the impeller rotates after overcoming the friction torque and fluid resistance, and the impeller speed is constant after the balance of each torque. Under certain conditions, the impeller speed is proportional to the average pipeline flow rate. The rotation of the impeller periodically changes the induced potential of the detection coil, that is, the electric pulse signal, which is an amplifier, plastic output pulse signal or 4 ~ 20 m ADC signal to display the instantaneous flow value or total amount. In a certain flow range, the pulse frequency F is proportional to the instantaneous flow rate of the fluid flowing through the flow meter sensor, with the calculation formula

Q=3600*F/K

In the formula

Q— Instantaneous delivery (m³/h)

F— Pulse frequency (Hz)

K— Instrument coefficient(Pulse/m³), given by verification

Technical Specifications

Nominal Diameter                           DN6~DN200
Medium Clean liquid, such as water, oil...
Viscosity 5~400mpa.s
Operating Temperature -20~120℃
Nominal Pressure   PN16~PN63
Flow Range ≤1200m3/h
Accuracy 0.5, 1.0, 1.5
Body Material 304, 321, 316L
Impeller Material 2Cr13, Dual-phase steel
Ambient Temperature -20~60℃; RH5~90%
Signal Output Pulse, 4~20mA, RS485, HART
Working Power 24VDC±15%
Li-battery 3.6V10AH (No signal output)
Explosion Proof ExdⅡBT4;   Protection grade: IP65
Electric Interface M20×1.5
Process Connection Flange or thread connection
Instalation Horizontal

Pulse Output Intelligent Turbine Flowmeter
1.Working Voltage: external power supply 220VAC or 24VDC power supply (optional)
2.Signal Transmission Distance: less than 300 meters.
3.Instantaneous Display: four bits , total cumulative display: nine bits
4.Display Instrument Size
Horizontal type: 160mm * 80mm;
Vertical Type: 80mm * 160mm
The display instrument has 4-20mA output RS485 communication and can be connected to the computer.

 

Contact Us
Sichuan VACORDA Instrument Manufacturing Co., Ltd.
E-mail:    sales@vacorda.com
Tel:            0086-028-87362258
                 7X24 hours online
Address: Guanghua Rd, Qingyang Dist, Chengdu, Sichuan Province, China

* Note: Please make sure to fill in the information accurately and maintain smooth communication. We will contact you as soon as possible

+86
  • +86 CN
Submit