B69H No Blind Spots Bicolor Boiler Drum Water Level Gauge
1. Working Pressure ≤ 6.4MPa
2. Working Temperature ≤250°C (specially up to 450°C)
3. Center distance (mm) 550, 850, 1150, 1450, 1750 ± 1 ~ 5mm (the center distance is not in the above range of negotiated orders)
4. Mounting Flange Sealing Surface Vertical Plane Error ≤ 1mm
5. Wetted Material 304, 316L, carbon steel
6. Connection Flange Standard HG20592-2009 (user can specify)
High Temperature Industrial Grade Transparent Sight Glass Level Gauge For Boiler
Category：
Keywords：
Product Details
Product Description
The glass plate liquid level meter is divided into three types: light-transmitting, reflective and mirror-type. The liquid level meter is mainly composed of a liquid level meter body, an upper valve (a steam valve), a lower valve (a liquid valve), a sewage plug (sewage valve), and an insurance steel ball. When the glass plate is damaged by splitting or the like, the safety steel ball automatically blocks the gas and liquid side valves to prevent or reduce the outflow of the medium, and is convenient for manually cutting the root valve of the liquid level meter for processing. The series is sturdy, reliable and easy to install. It is an ideal instrument for liquid level observation in various medium and low pressure vessels.
The liquid level gauge is connected to the upper and lower flanges of the liquid level meter and the upper and lower flanges of the container to form a communicating device, so that the liquid level can be directly observed.
This product implementation standard: HG 21588-21592-95
Product Features
1. Directly observe the liquid level position;
2. It has a quick shut-off device for vapor and liquid leakage;
3. Reasonable structure, simple installation and maintenance;
4. Low maintenance costs;
Specifications of B49H Bicolor Boiler Level Gauge
| Model | B49H-10/2-W | B69H-16/2-W | B69H-25/2-W | B69H-32/2-W |
| Nominal Pressure（MPa） | 10 | 16 | 25 | 32 |
| Working Pressure（MPa） | ≤6.4 | 11.5 | 15.5 | 21.5 |
| Connection Method | DN20-PN10 | Welding Ø28×4mm | ||
| Flange | ||||
| Working Temperature | Saturated steam temperature | |||
| C-to-C Distance（mm） | 440、600、670 | 600、670、685、1026、1130、1270 | ||
| Visible Length（mm） | 250、300、420 | 300、420、430、460、480、550、670 | ||
| Light | Light Emitting Diode | |||
| C-to-C Distance ( mm) | Specifications of Sealing component( mm) | Number of windows | Length( mm) | Visible Length( mm) |
| 440/ 600 | 100x44 | 5 | 425 | 306 |
| 142x44 | 3 | 425 | 300 | |
| 290x44 | 1 | 360 | 250 | |
| 670/ 800 | 155x44 | 5 | 580 | 460 |
| 142x44 | 5 | 540 | 420 | |
| 100x44 | 7 | 545 | 430 | |
| 600 | 100x44 | 5 | 425 | 306 |
| 142x44 | 3 | 425 | 300 | |
| 670//1026 | 155x44 | 5 | 580 | 460 |
| 142x44 | 5 | 540 | 420 | |
| 100x44 | 7 | 545 | 430 | |
| 100x44 | 9 | 660 | 550 | |
Operation and Maintenance
After the instrument is connected to the flange of the container, the pressure test shall be carried out according to the regulations, and the use shall be allowed only after the requirements are met.
Preparation
1. Open the drain valve (plug);
2. Slowly open the upper valve (steam valve). When the temperature difference between the ambient temperature and the medium temperature is greater than 40 degrees, the liquid level meter must be preheated. After the temperature of the liquid level meter reaches the medium temperature, the valve can be opened gradually until all Open
3. Slowly close the drain valve (plug), observe the level gauge and each joint, if there is leakage, it should be treated;
4. After no leakage, slowly open the lower valve (water valve) to observe whether the water level is normal;
5. Fully open the upper and lower valves to put the liquid level meter into operation
Operation and Maintenance
1. It is strictly forbidden to observe the water level during operation;
2. Pay attention to the leakage of the sealing ring. If there is any leakage, it should be handled in time to avoid media leakage and injury;
3. When the contamination inside the glass plate cannot be observed, close the vapor-liquid side valve and open the drain valve (plug). After the pressure is completely relieved and the medium is drained, the glass plate can be removed for cleaning. After re-installation, it must be confirmed. No leakage can be put into use;
4. When the equipment is overhauled or the user makes the inspection cycle according to the corrosion and cleaning conditions of the liquid medium, check the safety steel ball in the upper and lower valves of the instrument. If there is corrosion, scaling, deformation, etc., it must be replaced immediately.
Contact Us
Sichuan VACORDA Instrument Manufacturing Co., Ltd.
E-mail： sales@vacorda.com
Tel: 0086-028-87362258
7X24 hours online
Address： Guanghua Rd, Qingyang Dist, Chengdu, Sichuan Province, China
Related Application
Hot Products
Address：Guanghua Rd, Qingyang Dist, Chengdu, Sichuan Province, China
E-mail：sales@vacorda.com
Copyright © 2024 Sichuan VACORDA Instruments Manufacturing Co., Ltd.
