Smart UQK Float Level Switch Water Level Controller
Product Details
Working Principle
UQK side mounted magnetic float liquid level swith and pontoon level switch consist of reed and magnetic float ball, which is based on the floating principle that utilizes magnetic float ball to make the relevant reed close or open according to the height changing of the liquid level, thus controlling and measuring the liquid level.The UQK type float ball level switch consists of two parts of the floating ball group and the contact group, which are isolated from each other. Through the floating ball sensing the change of the liquid level, the liquid level is alarm and controlled through the transmission of the magnetic axis.
When the measured liquid level rises or decreases, the floating ball will rise and fall, so that the magnetic steel at its end swings up and down, and the magnetic steel, which is installed in the same magnetic pole in the shell, swings up and down by magnetic force, prompting the contact switch action, making it connected or disconnected, and then sending out light or sound signals in the signal device in the circuit, or starting an electric pump. Liquid or discharge.
When floating ball rises and falls with the liquid level, it will only be used when it is in the up and down maximum position of the Action range, the contact switch will change from normally closed state to normally open state, and then send out a signal, and in the process of rising and falling, there is no signal generated.
The floating parts of the switch are isolated from each other, thus avoiding the defect of general liquid level instrument leakage.
Installation And Application
1.UQK float ball level switch adopts standard flange and connected with the switch.
2.UQK-01 and UQK-02 float level switchs are installed horizontally and UQK-03 float level switchs are installed vertically.
3.When installing the UQK-03 float level switch, because the float diameter is larger than the flange hole diameter, the container cover should be detachable.
4.The adjustment of the action range of the UQK-02 float ball level switch is a step adjustment with a maximum action range of 550 mm.
Action range adjustment method: when use, it can be achieved by adjusting the relative position of the upper and lower two positioning screws on the fan lever (Change the swing angle of the floating ball) or dismantling the opening pin to replace the connecting rod of different lengths (changing the swing radius of the floating ball).
5.The setting of the action range of the UQK-03 float ball level switch is stepless adjustment, and the maximum action range is 1000mm
The adjusting method of action range is achieved by changing the relative position of the positioning screws on the floating ball guide rod and the balance block on the lever.
6.The switch is non -waterproof structure, not suitable for outdoor use.
7.When the switch is installed, the metal shell should be reliably grounded (usually connected to the flange) to ensure the safety of electricity
8.The controlled medium should not contain any magnetic impurity, and the fluctuation frequency of the liquid level should not be too large.
9.The instruments in use should be checked regularly.
Contact Us
Sichuan VACORDA Instrument Manufacturing Co., Ltd.
E-mail： sales@vacorda.com
Tel: 0086-028-87362258
7X24 hours online
Address： Guanghua Rd, Qingyang Dist, Chengdu, Sichuan Province, China
Related Application
Hot Products
Address：Guanghua Rd, Qingyang Dist, Chengdu, Sichuan Province, China
E-mail：sales@vacorda.com
Copyright © 2024 Sichuan VACORDA Instruments Manufacturing Co., Ltd.
